List price of 4812-36:
$2,649.00 - Your discount price for this item: $2,039.73.
List price of 4812-38: $2,853.00 - Your discount price for this item:
$2,196.81.
Motor . . .
1/2 H.P., Hobart-designed,
grease-paced ball bearings, expressly designed for this
unit. Motor ventilation is provided through screened
openings in the base, assuring cool operation.
Single-phase is capacitor-start induction run type.
Three phase is polyphase squirrel, inductor type.
Available in standard electrical specifications as shown
below. Not available in direct current.
Switch . . .
Conveniently mounted at back of
machine (can be changed to front).
- A manual ON/OFF switch is furnished as standard equipment
on all 60 Hz. and 115/60/1 machines.
- A pushbutton stop-start switch with thermal overload
protection and no-voltage release is furnished as standard
equipment on all 50 Hz. machines except 115/50/1.
Cord & Plug . . .
A 6 foot, flexible 3-wire cord and
plug for grounding is furnished for 60 Hz., single-phase
machines only. An I.E.C. cord is always
furnished on 50 Hz. machines.
Transmission . . .
Precision made gears and shafts
mounted on ball bearings are fully enclosed in the
transmission case, packed with a special grease at the
factory. Smooth, quiet operation is assured for years
of normal operation. Worm speed 174 RPM..
Capacity . . .
This unit will grind 8 pounds per
minute through a 1/8" plate on first cutting, with a
substantial increase in capacity when first cutting is
through plates with larger holes. Operation is rapid,
with a minimum of meat remaining in the cylinder. Its
exceptionality fine appearance, coupled with high capacity,
adapts it to "on-demand" meat chopping..
Finish . . .
Standard finish is a stainless steel
housing. An attractive stainless steel trim plate is
provided at the attachment opening, and polished stainless
steel legs, cushioned on the bottom with resilient neoprene
rubber, provide clearance to keep the table clean under the
chopping unit.
Chopping End . . .
Hobart spiral-fluted type, with flutes
of cylinder scientifically timed to speed and pitch of the
chopping worm - providing the finest and cleanest cutting
action yet developed. The protective type chopping end
is heavily tinned. The large rectangular feed pan is
stainless steel. A Stay-Sharp knife, heat treated
steel plate and a plastic steel stomper are provided.
Unit available at extra cost with corrosion-resistant Brite
Metal chopping end with chromium-plated stain finish.
Stay-Sharp knife and Stay-Sharp plate, and plastic feed
stomper.
All parts which contact
food, including cylinder, worm, knife, plate, adjusting
wheel, and feed pan, are readily and quickly removable for
cleaning. The entire end can be removed by simply
loosening the holding screw extending from the corner of the
housing.
Device No. 4812-1A . . .
Includes the working unit with
protective type tinned chopping end, stainless steel feed
pan, plastic feed stomper, one knife, and one plate.
The plate has 1/8" diameter holes..
Weight . . .
Net weight 118 lbs.
Approximately shipping weight 144 lbs.
Dimensions . . .
11-3/8"W x 24"D x 23-1/4"H
Please check our Restaurant
Equipment World, Inc. site for an additional equipment selection of
more than 25,000 items including this same type of equipment.
All orders are processed via Restaurant
Equipment World, Inc. Restaurant Equipment World, Inc. sells high
quality restaurant equipment at discount prices and has more than 20 years
experience in the business. Upon clicking on a product you will be
automatically transferred to the Restaurant Equipment World, Inc. website
for SECURE
processing.
